Last Modified: 11-29-2007 1.6 D
Service Category: Engine/Hybrid System Section: Cruise Control
Model Year: 2008 Model: Sequoia Doc ID: RM000003G06000X
Title: CRUISE CONTROL: DYNAMIC LASER CRUISE CONTROL SYSTEM: INITIALIZATION (2008 Sequoia)

INITIALIZATION

1. INITIALIZE DISTANCE CONTROL ECU

NOTICE:

After replacing the distance control ECU and engine ECM, it is necessary to initialize the distance control ECU so that the ECU can recognize the specification of the vehicle.

(a) Perform the following procedures after replacing the distance control ECU.

(1) Turn the ignition switch to ON.

(2) Turn the cruise main switch on.

(3) With the brake pedal depressed, push the cruise control main switch to RES/ACC 3 times within 3 seconds. Check that the buzzer sounds at this time.

NOTICE:

Do not turn the headlight dimmer switch on at this time because the optical axis automatic adjustment mode has already started, which may lead to an incorrect optical axis setting. If the headlight dimmer switch is turned on by mistake, readjust the optical axis CRUISE CONTROL: LASER SENSOR: ADJUSTMENT (2008 Sequoia) .